Wuhan Jia Qirui Card Technology Co., Limited
Wuhan Jia Qirui Card Technology Co., Limited Honesty First, Professional Concentration, In Pursuit Of Excellent And Service Forever
Add to Cart
Dispenser Five-axis Servo Robot Arm for Automatic Disposable Plastic Spoon Packaging
Introduction:
The HT series robots are used in the 400T-4000T plastic horizontal injection molding machines with 3-axis and 5-axis AC servo drives. The finished arm is for taking out the product and the nozzle. The upper and lower arm structures are double-cut type, and the material clamping arm can be used for the water clamping port; the material head arm can be driven by a cylinder drive or an AC servo motor. The take-out time is 1.5 sec, the full cycle time is 12 sec, and the maximum load is 100 kg (including finished product and fixture). Used for quick removal or a variety of removal applications.
Parameter:
| Model | HTW-1700 |
| Size (length*width*high) | 3600*2400*2250mm |
| Power Source | AC220V±10V 50/60 HZ |
| Working Pressure | 5Kgf/cm² 0.49Mpa |
| Max.AllowedPressure | 8Kgf/cm² 0.8Mpa |
| Drive System |
S5-AC Servo Motor S3-Auxiliary arm pneumatic |
| Swivel | 90° Fixed Pneumatic |
| Control System | CNC |
| Power Capacity | 5/8KVA |
| Recommendedl.M.M. | /1300ton |
| Traverse Stroke | 2800mm |
| Crosswise Stroke |
S3:P:1300 S5:P:1300R:900 |
| Vertical Stroke | 1700mm |
| Max.Loading | 20Kg |
| Dry Take Out Time | 2.2s |
| Dry Cycle Time | 17s |
| Air Consumption | 90 NI/cycle |
| Net Weight | 1350-1600Kg |