Wuhan Jia Qirui Card Technology Co., Limited
Wuhan Jia Qirui Card Technology Co., Limited Honesty First, Professional Concentration, In Pursuit Of Excellent And Service Forever
Add to Cart
Industrial Large Handling Robot Arm / Large Three-axis Servo Robot Arm
Introduction:
The HTN series robots are used in 400T-4000T plastic horizontal injection molding machines with 3-axis and 5-axis AC servo drives. The finished arm is for taking out the product and the nozzle. The upper and lower arm structures are double-cut, the take-out time is 1.5sec, the full cycle time is 12sec, and the maximum load is 100kg (including finished products and fixtures). Used for quick removal or a variety of removal applications.
Parameter:
| Model | HTNW-1300 |
| Size (length*width*high) | 2580*1760*1850mm |
| Power Source | AC220V±10V 50/60 HZ |
| Working Pressure | 5Kgf/cm² 0.49Mpa |
| Max.AllowedPressure | 8Kgf/cm² 0.8Mpa |
| Drive System | AC Servo Motor |
| Swivel | 90° Fixed Pneumatic |
| Control System | CNC |
| Power Capacity | 4KVA |
| Recommendedl.M.M. | 400-600ton |
| Traverse Stroke | 2000mm |
| Driven | 3-axis AC servo motor drive |
| Crosswise Stroke | 1300mm |
| Vertical Stroke | 300-1200mm |
| Max.Loading | 12Kg |
| Dry Take Out Time | 1.5s |
| Dry Cycle Time | 12s |
| Air Consumption | 80 NI/cycle |
| Net Weight | 580Kg |